marbled dragonfly card

Handmade card using Stampin' Up products, by Kitty Smith, bashfulcat.com.

Marbled Background

Today’s card is all about that marbled background; the dragonfly is really just an accent piece.  However, I almost titled this one “Easier than it looks”.  The message I really want to share today is that anyone can make cards.  Every time someone says “but I’m not creative”, I just cringe.  I can understand that some people just aren’t that interested in crafting – but please, don’t assume that you have to have some rare creative gene to pull it off.

The Right Tools

This card is a perfect example of “having the right tools”(but stay tuned ’til the end of this post, because I have a wonderful suggestion for those who don’t have all the fancy tools!).  I started with a plain white piece of cardstock cut to 5-1/4″ x 4″, and I used just two colors of ink:  Marina Mist and Night of Navy.  (Note: links for most of the products used here are listed below.)  All the hard work was done by the Marbled background stamp.  I saw this stamp in action at a friend’s house, and had to immediately order it.  It’s so incredibly versatile!  Here’s how I got the look you see above:

Ink to Stamp, Not Stamp to Ink

I started by placing the stamp face-up on my work surface.  With background stamps, I find it so much easier to leave the stamp like this, and bring the ink to the stamp (instead of the usual stamp to ink method).  An added bonus is that you don’t have to have a large acrylic block for this method.  I started with my lighter color, Marina Mist, and just took the ink pad directly to the stamp, and covered the whole stamp with ink.  (It helps to take your time, and try not to leave any “lines” from the edge of the stamp pad.)  Then, I took my darker color, Night of Navy, and using a sponge, I just dabbed a little bit of ink, here and there, right over the Marina Mist ink.

Once I was happy with the ink, I took my piece of white cardstock, placed it directly onto the stamp, and pressed it down.  (In this case, because the stamp is slightly larger than my piece of paper, I recommend taking a piece of scratch paper and placing it over the whole thing – it will help cut down on “inky fingers”.)  😉  You want to apply firm, even pressure over the whole thing.  It may help to take a clean acrylic block and rub it over the paper and stamp.  Just be sure not to let your cardstock move around.

Magic

And then, it was time for the big reveal!  I love this part.  🙂  When you lift your paper off the stamp, it’s never the same twice – but with this stamp, it’s always beautiful.  You can use this method with any color you’d like, and you can use more than two inks. And it’s even pretty with just one… but I love the variation you get with a darker accent color.

Finishing Touches

The rest was easy:  glue marbled paper to Night of Navy cardbase, die-cut dragonfly from same navy paper, add sentiment, and add some rhinestones for a touch of bling.  I did add some vellum to the back of my dragonfly – not necessary, but it helps the dragonfly to jump out a bit more from the busy background.  And to adhere the dragonfly to the card, I just used a couple of glue dots in the middle of his body – that way, I was able to curl up his wings a bit and give him some flight.

If You Don’t Have the Tools…

I promised to share a suggestion if you don’t have a gimongous collection of stamps and inks and paper.  Sure, having all those toys is really cool, but it may not be practical for everyone.  (And some people do have the toys, but feel like they lack the ideas or initiative.)  That’s where I come in.  If you’re local and/or know me personally, please come craft with me!  I promise you’ll have fun, and make amazing cards!  But if that’s not an option, how about a kit?

 

Paper Pumpkin

Stampin’ Up has something called Paper Pumpkin. Each month, a nice, bright, pumpkin-colored box comes right to your doorstep.  In it, you will find all of the tools and materials you need to make a bunch of cards and/or paper projects.  Other than maybe some adhesive, you’ll have everything you need to go to town.  Every kit includes at least one ink cube (Stampin’ Spot), and an exclusive stamp set!  And, your first order will even include an acrylic block.  You’ll find complete instructions in the box, to use everything that’s included… but one of things I love about these kits is the versatility.  You are certainly welcome to follow all of the directions to the letter, but you also have the option of mixing things up a bit, and making the projects your own.

I’m still a bit of a newbie with these kits, but I’m loving them so far.  In the coming months, I plan to work a lot with them and share ideas on how to do more with them than just what the directions show.  If you’re on the fence about whether or not card-making is for you, I encourage you to give these kits a try.  It’s a great way to get your feet wet, and see if this is something that brings you joy.

SALE!!!

And right now, if you sign up by September 10th, you will get your first kit for half off!  Just use the promo code HALFOFF0917.  The usual price of $19.95 a month is already a great deal, but this gives you a reason to give it a try.  You can cancel at any time – there is no long-term commitment.

If you don’t already have a Stampin’ Up demonstrator, I’d love to have you as a customer.  I’m always available if you have questions, and I’ll be doing some cool things for my customers as I grow into this role.  And if you’d like to join my team, let me know.  You can help me become a rockin’ team leader.  😀

There are all types and styles and levels of crafters.  I really think that, as crafts go, card-making is very forgiving.  I’ve tried a LOT of crafts, but I tend to suffer from “perfectionism”.  That was, until I tried card-making.  It is so freeing!  In one sitting, I can complete a little work of art, suitable for sharing.  But even if I mess up, all I’ve lost is a piece of paper.  So if you’ve ever wanted to try, just go for it.  It could be just the creative outlet you’ve been looking for.

Thank you so much for stopping by, and happy crafting!

 

Supplies mentioned (affiliate links used wherever possible.  See here for full disclosure.):

Marbled Background Stamp
Detailed Dragonfly Thinlits
Night of Navy Ink
Marina Mist Ink
Night of Navy Cardstock
Whisper White Cardstock
Rhinestone Basic Jewels
Stamping Sponges

soft sweet sympathy card

Sympathy card made with Stampin' Up products, by Kitty Smith, bashfulcat.com.

Soft Sympathy Card

I was going for a soft, muted look for this sympathy card, and I’m happy with how it turned out.  Pairing Very Vanilla with Sahara Sand paper worked even better than I expected.  I already loved the technique of using strips of patterned paper for a background.  Using Stampin’ Up’s awesome Designer Series Papers just kicked it up a notch.

The Details

I started with five designs from the Falling in Love paper set.  It’s retired, but this technique works with nearly any paper.  (I think this exact design would be gorgeous with the new Bundle of Love Designer Series Paper, on Very Vanilla, maybe with Blushing Bride accents.)  For this card, I chose five patterns, and cut a 3/4″ thick strip from each.  One of my favorite tricks for getting different patterns to work well together is to ink the edges.  I sponged on some Sahara Sand along all the edges before adhering the strips to a piece of vanilla cardstock, cut to 4″ x 5-1/4″.  After the strips were all glued down, I trimmed the excess, and then sponged around the whole rectangle, before adhering it to a Very Vanilla card-base.

Accent Pieces

I used the Flourish Thinlits set to cut out three flowery flourish pieces from Sahara Sand paper, for accent pieces.  The sentiment was stamped with Soft Suede ink, with a little fishtail edge, and more of that Sahara Sand sponging.  It’s adhered with some dimensionals.

Sympathy cards are always a struggle, because none of us like to think about what they represent… but I know that they can mean a lot to the recipient, so I like to keep some in my stash.  This design, though, would work equally well as a “Thinking of You” card.  Actually, with a change of papers, and colors, and accent pieces, there’s really no limit to what you could do with this design.

Thank you so much for stopping by!  If you have any ideas, suggestions, questions, or you just want to chat about crafty stuff, please don’t hesitate to send me a note.  I love to make new crafty friends!  Have a super awesome day!

Supplies used (with affiliate links, where possible- see here for full disclosure):

Soft Suede Ink

 

Flourish Thinlits
Banner Triple Punch
Flourishing Phrases
Stamping Sponges
Very Vanilla Cardstock
Very Vanilla Thick Cardstock
Sahara Sand Ink
Sahara Sand Cardstock

rustic country quilt card

Rustic country quilt card, made with Stampin' Up's Wood Words stamp set, by Kitty Smith, bashfulcat.com.

Cozy Quilt

Well, I was going for sort of a rustic, old-timey, cozy quilt card here.  Did I hit the mark?  I can’t really take credit for the idea, though – there are a few variations of this card floating around on Pinterest.  I saw one, and immediately thought of previous “quilt card” designs I’ve done in the past, but with patterned paper instead of stamps.

Lots o’ Squares

It’s a fun technique.  I started with some old Kraft paper I had floating around, but Crumb Cake would work just as well here.  I used it for the card base (standard A2, 4-1/4″ x 5-1/2″), and also cut a 3-3/4″ square from it.  I then cut out a whole mess of 1-1/4″ squares from Dapper Denim, Crushed Curry, Calypso Coral, Tranquil Tide and Cherry Cobbler.  I pulled out the matching inks, and did some tone-on-tone stamping with the new Wood Words stamp set.  (In other words, I stamped the star on the Crushed Curry squares with Crushed Curry ink, and Cherry Cobbler hearts on Cherry Cobbler squares, etc.)   I then chose nine squares and arranged them all on the larger Kraft square.  Once I was happy with the placement, I used some snail adhesive to attach them all, being sure to place them as even, straight, and close together as possible.

Quilting

Once my quilt squares were all securely in place, I took the whole 3-3/4″ square piece, and ran it through my Big Shot with an old embossing folder called Stylish Stripes.  (Sorry, it’s retired, but there are lots of similar ones that would work.)  I had fun playing around, trying to come up with something that looked “quilty” to me, and ended up using the diagonal stripes, but running in through TWICE.  I actually embossed it one way, then flipped the piece over and embossed it the other way.  It’s subtle, and is hard to see in the photo, but it gave the quilt piece sort of a plaid pattern.  Don’t be afraid to experiment with the tools you have – you might just come up with something amazing.  🙂

Finishing Touches

To finish up the card, I wrapped some twine around my quilt piece, and adhered it to the card with some dimensionals.  Then I cut a piece of Cherry Cobbler cardstock to 3-3/4″ x 1-1/4″, for the bottom of the card.  (It really doesn’t show up in this picture, but I also ran that piece through the embossing folder, twice.)  The Hello Friend sentiment is part of that same stamp set, stamped in Crumb Cake on a small piece of Kraft.

Misc. Tips

There are a few things going for you here, if you decide to try a similar card.  First, this particular stamp set is designed to look “rustic”.  It doesn’t matter if your stamping is perfect because the impressions are supposed to look a bit worn.  Second, the embossing folder works wonders for hiding slight imperfections – with the stamping, and with the gluing.  While precisely measured squares, and nice, straight lines help, this card still looks lovely when things are just a bit off kilter.  It’s a quilt – it’s supposed to look home-made.  That’s what gives it its charm.  🙂

So what are you waiting for?  Go try your own version of this card!  Really – change the colors, use whatever stamps you like, try different embossing folders… and then let me know what you come up with.  I would love to see your results!

Thanks so much for stopping by, and for hanging in there with me.  I haven’t posted as often as I’d like to, but I have big plans for this blog!  I love making cards, and I’m nowhere near out of ideas.  😀  Have an awesome day!

Supplies (with affiliate links where available):


 

high flyin’ chicken – dare to dream card

Dare to Dream card with Stampin' Up! products, by Kitty Smith, bashfulcat.com
(This post includes some affiliate links, where available.)

Dare to Dream

I can’t help it;  I know this chicken stamp has retired (Hey Chick stamp set), but this little guy just cracks me up!  Just about any critter stamp, though, would work here.  It’s the googly eyes – they just up the playful quotient on any card.  🙂

Card details:

This card really starts with the Dare to Dream Stamp Set, a hostess set currently available for anyone who wants to place a larger ($150.00 or more) order with Stampin’ Up!

(And here’s the blatant commercial advertisement for Stampin’ Up!  It’s a great time to place a large order!  For every $50.00 you spend in July, you’ll get a coupon for $5.00, to spend in August.  Woohoo!  Yay for Bonus Days!

So, this stamp set has some awesome sentiments – it’s the reason I chose the set.  It also has a tiny hot air balloon image, which gave me the idea for this card design.  I needed a MUCH bigger balloon for Mr. Chicken, though. One of my older die sets, Basket Builder (sorry, it’s retired, too), had a perfect basket for the bottom of the balloon, but I had a heck of a time with the actual balloon part.  In the end, I Googled balloon images, and used the inspiration to draw my own.  (Yeah, I was REALLY desperate – I almost never rely on my own drawing skills, LOL.)  I used Watercolor Pencils to color it, and a Blender Pen to smooth it out.

Placement:

I cut a piece of Soft Sky cardstock to 4″ x 5-1/4″.  Both the basket and the balloon, were just glued down, but before I did that, I arranged my pieces, then did my stamping on that blue piece.  (You know that saying, “arrange twice, glue once”?  Something like that, anyway. ;-))  I stamped my chicken where I knew he would be partially covered up by the basket, and then I added the sentiment, and some cloud shapes (from the Dare to Dream Stamp Set) here and there, to help indicate that he really was flying.  I colored the chicken, making his “hair” and tail feathers match the balloon.  (I also added a bit of Wink of Stella Glitter Brush to that wig and tail.)  After I glued down my balloon, I just used a ruler and black pen to draw in the strings that connect the balloon to the basket.  And I glued on those oh-so-cute googly eyes.

Another version…

This wasn’t my only attempt at this card design.  I also just had to see what would happen if I added some “real” string to the balloon.  It took a little effort to tie those tiny bows (okay… maybe that’s an old person problem, LOL), but here’s what I ended up with:

Dare to Dream card with Stampin' Up products, by Kitty Smith, bashfulcat.com

While I do like the string, I decided that the landscape orientation didn’t give me enough room for the balloon.  If I find the patience to try this card again, I’ll probably create a version that combines the best of both of these.  (I didn’t want to wait to post this, though… I happened to mention to a friend about my “chicken in a hot air balloon”, and I think I piqued her curiosity, LOL.) 

The Inside:

For the inside of my cards, I love to find quotes that fit the images on the card front.  I send a LOT of cards, often to the same person, and I hate to just say “Thinking of you” over and over.  I love T.S. Eliot, and I thought this quote fit the card perfectly.

That’s it from me today.  As always, I really appreciate everyone who stops by my blog.  And, although I’m shy, I love meeting new crafty friends, so please don’t hesitate to send me a note.  Have a beautiful day!

 

 

 

 

happy 4th of july, 2017 – red, white & blue card

Happy 4th of July card, by Kitty Smith, bashfulcat.com

Happy 4th!

Cardmakers love holidays.  It’s not that we need an excuse to make (or send!) a card, but holidays give us a special reason, and lots of inspiration.  Fourth of the July cards are no exception.  There are lots and lots of wonderful red, white & blue paper creations on the Internet, many (most?) of them featuring some version of our country’s flag.  I am not the first person to envision the wavy lines from the Swirly Scribbles die set as perfect for the stripes on our flag, but I did try to put my own spin on this card.  Maybe my ideas will help spark some of your own.

The Card:

I started with a piece of white cardstock, and an old embossing folder that just happened to really fit the theme – but just about any kind of design would enhance this card.   It wasn’t necessary, but it’s amazing how much an embossing folder can add to a card.  I cut out those wavy stripes from some Real Red cardstock, and layered a couple of rows of them on top of the embossed white piece.  Instead of a boring square for the upper left-hand corner, I went for a navy blue heart.  I thought that three tiny stars was all that was needed here, but I realize that this would probably look even more like a flag if the heart was full of stars.

Words…

I couldn’t find anything in my stash that actually said “Happy 4th of July”, so I had to improvise.  The word “happy” is actually from the new Happy Birthday Thinlits Die;  I just snipped off the birthday part.  For the rest, I just dug through my stash, finding a number 4, and a little “th” that would fit.  It’s an easy-peasy card, but still bright and fun.  For the inside, “Time to Celebrate” seemed appropriate (it’s from a retired project kit, Watercolor Wishes), and a row of stars gives it a more finished look (see below).

Happy Fourth of July card by Kitty Smith, bashfulcat.com

What are you doing for the holiday?  Any big fireworks planned?  Wishing you all a Happy Fourth of July!  Thanks for stopping by!

Supplies:


happy father’s day card 2017

Father's Day card made with Stampin' Up products, by Kitty Smith, bashfulcat.com.

Happy Dad’s Day!

Just a quick post to share this Father’s Day card, and to wish all the dads out there an awesome day!  Those Swirly Scribbles dies are just so darn versatile!  I used the wavy stripes die for the water, and the smaller round die for the sun.  The boat was stamped on a separate piece, and then I just fussy-cut it out, leaving a small white border.  Then I cut out three rectangles in white, red and blue.  (I used a die for this, but you could certainly just use a trimmer.)

Putting It All Together:

I glued the waves and sun to my white rectangle, and trimmed off the excess.  Then I took my fussy-cut little boat and popped it up with some dimensionals.  All three rectangles are layered, at an angle, onto a Crumb Cake card base, the white one with dimensionals.  The sentiment is from my stash – just happened to be the only stamp I could find that said “Happy Father’s Day”.  I stamped it on a strip of white, and gave it a little fish-tail end before gluing it to my card base.

Nothing really tricky here – just a happy little summery card, and one that would work equally well for a birthday.  Thanks so much for stopping by, and have a wonderful Dad’s Day!

 

Supplies:


sweet frosted sugarplum flower card

Sweet Frosted Sugarplum flower card using Stampin' Up products, by Kitty Smith, bashfulcat.com.

Use What You’ve Got

This sweet, sparkly sugarplum flower card is made using a few old, leftover products I had.  However, I wanted to share it with you because I think it’s a good example of using what you’ve got.  You could change the color, change the paper, change the die-cut, change the sentiment, change the bling – and still end up with a really lovely card.  For this one, I started with a piece of Fancy Frost Designer Series Paper.    The white paper that looks like it’s embossed with stars?  That’s the Fancy Frost – no embossing folder needed.  (It’s not a current item, but I just checked, and Stampin’ Up still has some in their clearance rack – can’t beat the price!)  You could totally get a similar look with a piece of plain white cardstock and any embossing folder you happen to have.

I matted the starry paper with a piece of Sweet Sugarplum cardstock (that darker pink one), and put the whole thing on a top-folding standard-sized card base.  (Note that if you want to add a rounded corner, you’ll want to round each of those three pieces first, before you adhere them together… yes, rather obvious, but it’s just the sort of thing I would think of after the fact… and no, this wasn’t the first version of this card that I made, LOL.)

The layered flowers are from the Sunshine Wishes die set, cut from Sweet Sugarplum and Pink Pirouette.  I thought about layering three of them, but liked the simplicity of just these two shades of pink, on the white base.  I think this flower is a really great, versatile die, and makes a lovely card by itself… but a little bling is always a good thing, right?

Bling

Yes, I’m sorry:  that gorgeous, sparkly Sweet Sugarplum Glimmer Paper has been retired.   I couldn’t resist using what I still had, though, to make this card.  And I thought it might be a good example to show you that a little bit of that Glimmer Paper (still available in other colors!) can go a LONG way.  All I used here were some tiny scraps.  I started with that thin strip along the left side of the card, but it seemed to make the card a little unbalanced.  The teeny tiny bow on the flowers is from a retired die set (Balloon Pop-up), but there are tons of bow dies out there that would work just as well.

At this point, I got stuck.  The card needed “something”, but I couldn’t find the right thing.  I wanted to add some rhinestones, but the clear ones just didn’t work.  I tried just about every type of “dot” I could find in my stash, but nothing was a perfect match.  (Did I mention that this wasn’t my first attempt?)  Finally, I got smart – if I wanted an embellishment that would match, I needed to make my own – from the same supplies I was already using on the card.  So, I took a tiny scrap of that glimmer paper, and a plain ol’ hole punch, and I punched out three dots.  I coated each one with my fine-tip glue pen, and that added some shine, and a little bit of dimension.  Voila – homemade, matching embellishments.  🙂

The Sentiment

I love to send cards that say “sending hugs”, but I couldn’t find a stamp that actually said that… so I improvised.  The Sunshine Sayings stamp set has a whole bunch of various words that are designed to be used together to create phrases.  One of them says “sending”, and another says “& hugs”.  Knowing how much more likely I was to use the “hugs” without the “&”, I just chopped it right off.  I totally could have used the stamps as-is by doing some selective stamping with post-it notes, but for me, this was worth the sacrifice – and I’ve kept the “&”, just in case I want to use it later.  (I think the stamps will forgive me… in time.)  Some dimensionals give the stamped sentiment a little lift.

And that’s the card!  Easy-peasy, and a design I imagine I’ll use again sometime, with different colors, different die-cuts, and different “bling”.  How about you?  What would you change? 

Thank you so much for stopping by, and have a sweet sugarplum day!

 

Supplies:


timeless textures, bright butterfly card

Butterfly card with Stampin' Up's Timeless Textures, by bashfulcat.com

Just a Note…

I used three of my favorite colors to create this bright butterfly card – Melon Mambo (pink), Tempting Turquoise (blue), and Rich Razzleberry (purple).  I love how it came out!  And this card is so much easier than it looks – easy enough for my card class, even the beginners.  All you need is black and white cardstock, some sort of background stamp(s), some brightly colored ink, and a detailed butterfly die or punch.

The Background:

The background was super easy-peasy.  I used three different stamps from the Timeless Textures set, but there are all sorts of stamps that would work for this.  I love stamp sets like this one because you really can’t mess it up.  Each background is going to be unique, and I think that’s awesome!  More busy, less busy, a single image, a full background stamp – they would all look good here.  My only suggestion would be to stick with the same ink colors you’ll be using for your butterfly.

The Butterfly:

I must confess that this started out as an experiment, copying the glitter/packing-tape technique I found on Pinterest.  While I was able to produce a gorgeous butterfly, I wasn’t so sure about using this for a class.  Let’s just say that this early in my teaching experience, I’m not quite ready to face a room full of unpredictable crafters and a bunch of loose glitter, LOL.  So, I actually experimented with several different methods, and this one was the winner.

I started with a butterfly, die-cut from a piece of black cardstock, and a piece of plain white cardstock cut just slightly larger overall than the butterfly.  Then, I pulled out my ink and some sponge wedges, and I just pounced on tons of color, onto that white cardstock, until I had something that looked like this:

I know it doesn’t look like much now, but when you layer the butterfly image on top… WOW!  Now I found that I liked the look I got from sort of just pouncing the color on, but others did more of a rubbing technique, and it looked lovely, too.  And some preferred a softer look, and used less ink – also lovely.  I also just went for stripes, to get a fairly even mix of color – but I’d like to try this again with a more random, splotchy look.

Finishing the Butterfly:

Once you have enough color on your piece of paper, you can glue your black butterfly on top, just making sure that it doesn’t extend past the edges of the colorful paper.  A fine-tip glue pen will work, or any liquid glue just carefully dotted on the back of the butterfly should hold it.  Give the glue just a moment to dry, and then simply cut around the butterfly to remove the excess colorful paper.  I intentionally chose a butterfly design that is pretty rounded, and not that challenging to cut around.  However, if you find you’re having trouble cutting around some of the tighter corners, you could take a black brush-tip marker around the edge, and I imagine that it would make any missed areas virtually disappear.

Putting it All Together:

To finish off the card, I just used some snail adhesive to attach the background piece to a black card-base.  For the sentiment, I used a small scrap of white cardstock, matted with black, and adhered with some dimensionals.  And for the beautiful winged creation, I used a couple of glue dots just on the body of the butterfly, so I could “puff up” the wings a bit, and give him some dimension.  Here’s one more view:

Bright butterfly card made with Stampin' Up products, by Kitty Smith, from bashfulcat.com.

Thank you so much for stopping by!  Have a beautiful day!

Supplies:


make-your-own ice cream sundae card

Ice Cream Sundae Birthday Card, by bashfulcat.com - made with Stampin' Up' products.

Nom nom nom…

Last night’s card class was so much fun!  One of the projects was this “make your own” ice cream sundae card.  It took a fair bit of “prepping” for me, but I wanted to make it as easy and fun as possible for the participants.

I started with a Crumb Cake card base – standard A2 size, top folding, portrait style.  Using a retiring stamp set (Gorgeous Grunge), I added some tone-on-tone texture to the background.  Any type of texture stamp would work here.  For the sentiment, I just used my trimmer to cut a piece of Whisper White to 3-3/4″ x 1-1/4″, and a piece of Real Red to 4″ x 1-1/2″, to give it a nice mat.  Doesn’t that big, bold sentiment practically pop off the card?  To display the focal image, I used some old dies, but anything would work for this.  I cut a 3″ circle from Whisper White, and a 3-1/2″ scalloped circle from real red.  And then the fun began!

The Fun is in the Details

Stampin' Up's Frozen Treats die set.

Each participant was given a bright red bowl, a silver spoon, and a cherry for the top of their sundae.  The rest was up to them!  I went for all vanilla on my card example above, but I gave everyone a few choices for their ice cream.  I wanted to offer more, but in the end, I went with the basics:  vanilla, chocolate and strawberry.  And lots of hot fudge, of course.

Stampin' Up's Frozen Treats die set.I was a little stingy with the spoons and cherries, but no one minded when they saw how cute they were.  I die-cut the spoons from silver foil paper, and the cherries from Real Red… but I wasn’t happy with just red cherries – I had to do this right.  So I also cut the cherries from brown cardstock, cut off those teeny tiny stems, and covered the red stem with brown.  But that still wasn’t good enough.  Maraschino cherries are always so shiny – so I added some Glossy Accents to each one.  Yes, it was really way too much for a simple card class, but I just couldn’t resist.  🙂

Chocolate Chips?Stampin' Up's Frozen Treats die set.

I did actually toy with the idea of offering chocolate chip and mint chip ice cream, but that REALLY would have been too much work.  However, if you’d like to make some for your own, I found that if I took one of the leftover brown cherries (the ones I used just for the stems), and cut it into about six pieces, these actually made for some decent chocolate chips.

Sprinkles

Candy sprinkles from Stampin' Up dies.

The finishing touch just had to be some brightly colored candy sprinkles.  I was determined to make sure there were plenty of sprinkles for everyone… which would have taken FOREVER with the die that comes in the Frozen Treats set.  It cuts out three little sprinkles at a time.  That’s fine if you’re just making one card, but not if you’re planning to make more than 20.  Thank goodness another blogger came to the rescue!  I wish I could remember where I read this, so I could give them credit.  Someone, somewhere, mentioned that they had discovered that the basket die from the Basket Builder die set cut out little pieces that were an exact match to the sprinkles!  Only, instead of three at a time, you get eighteen!  It made all the difference.  (However, I now have a whole ton of brightly colored baskets, LOL.  Any suggestions on what I could do with these?)

Finished Card Close-up:

Ice Cream Sundae Birthday card by bashfulcat.com, using Stampin' Up product.

The only thing that would have made this class more fun was if I had actually brought real ice cream, LOL.  However, Ione came through for us.  It was her birthday yesterday, so she brought us cookies!  (Thanks Ione!  I hope your birthday was wonderful!)  If you have any questions, thoughts, suggestions… or you just want to say “hi”… please leave a comment, or send me a note

Thank you so much for stopping by, and have a super-duper-sundae kind of day!

 

Supplies:


 

happy mom’s day! mother’s day card 2017

Handmade Mother's Day card, using Stampin' Up dies, by Kitty, bashfulcat.com.

Happy Mother’s Day!

Wishing all the wonderful, loving, hard-working moms out there an amazing day!  I don’t have any children, but I have so much respect for mothers – they work tirelessly, 24/7, doing the most important job there is:  raising our future.  🙂  (Thanks Mom!)

The Card

For this card, it was all about the die-cuts.  I love this die set!  It’s the Flourish Thinlits set, and it has a bunch of amazing dies that work well together, or by themselves.  I started with some Blushing Bride cardstock, and I cut out two of those lacy strips.  To get them to fit on the card this way, I did have to trim them down a bit, but if you’re careful, you can easily cut off on end to resemble the other, as I did here, and it’s nearly impossible to tell it was altered.  Because those strips are longer, though, you can easily rotate this design and make a portrait card.

Focal Image

The flower in the center was made by layering three different dies, and adding a rhinestone to the center.  It’s placed on a white square, which is placed on a pink square, and the whole thing is then added to the card base, diagonally, with dimensionals.  I don’t have a good, current Mother’s Day sentiment, so this is just an old stamp from my stash.  You could certainly use this design for other occasions – I think it would make a nice Thinking of You card.

Measurements and Details

I just love how this card turned out!  Simple, elegant… but so easy!  While I did the die-cutting in advance, to save time, I did use this card design for a class, and everyone seemed to love it!  If you’d like to try it, you’ll need:

(1) piece of Blushing Bride, cut to 5-1/2″ x 8-1/2″, scored (standard A2 size)

(1) piece of Whisper White, cut to 5-1/4″ x 4″

(1) 2″ square of Whisper White

(1) 2-1/4″ square of Blushing Bride

Plus the following die-cut pieces: (2) lacy strips in Blushing Bride, (1) large flower in Blushing Bride, (1) medium flower in Whisper White, and (1) small flower in Blushing Bride.  And you’ll need one rhinestone, and adhesive.

If these measurements and details are helpful, please let me know.  If you have any comments, ideas, suggestions… or if you just want to say “hi”, please leave me a comment, or send me a message.

Thanks so much for stopping by, and have a beautiful day!

 

Supplies: